Network Link Test Pass LAN Cable Cat5e UTP

Basic Info

Model NO.	CAT5e UTP
Wire Core Material	Bare Copper Wire
Certification	CE, ISO, RoHS, CCC, VDE, ETL
Model	Cat5e
Brand	OEM
LAN Cable	Cat5e UTP
Fluke Test Pass	UTP 0.44mm Copper 90mts
Fluke Test Pass (CCA	UTP 0.48mm CCA 90mts
Transport Package	305mts Box or Reel, 5000′ft Reel
Specification	CE, RoHS, ISO9001, UL, ETL
Trademark	OEM
Origin	China
HS Code	8544491100
Production Capacity	20000 Boxes Per Month

Product Description

SHG 4 pairs Network cable Lan cables CAT5e UTP, high quality, low cost even 0.44mm Copper conductor can pass network link test 90meters. Test up to 100/350 MHz,Link Test: 0.44mm copper pass 90mts, 0.50mm CCA past 90mts.
Certification: UL, ETL, CE, RoHS, REACH, ISO9001
Quality warranty.

Network Link Test Pass, UL, ETL, CE, RoHS, ISO9001 approved !

Construction (CAT5 UTP (U/UTP) )
Conductor: Solid bare copper / CCA Diameter: 0.50mm / 24AWGInsulation: PE Average thickness ( +/-0.03mm): 0.2mmInsulation Dia ( +/-0.03mm): 0.90mm Min point thickness: 0.18mmCross:Jacket: PVC or LSZH Average thickness: 0.55Outer Dia( +/-1.0mm) 5.1 Min point thickness: 0.53Rip cord: YES

Core color:Pair 1: Blue - white/blue Pair 2: Orange - white/orangePair 3: Green - white/orange Pair 4: Brown - white/brown
Pair 4: Brown - white/brown

Application
1000BASE-T Gigabit Ethernet 100MHz Broadband Video
10BASE-T, 100BASE-T Fast Ethernet (IEEE 802.3) Voice, T1, ISDN
100 VG - AnyLAN(IEEE802.12), 155/622 Mbps ATM Patch Cord

Standard Compliances
All Category 5e Requirements as Per ANSI/TIA/EIA, ISO/IEC, and CENELEC EN Standards: ANSI/TIA/EIA 568-B.2 2ND Edition ISO/IEC 11801 Class D CENELEC EN 50173-1 IEC 61156-5, CENELEC EN 50288-2-1 Horizontal Cable Flame Retardancy is Verified According to IEC 60332-1Electrical Performance (100MHz)
1.0-100.0MHz Impendance(ohms) 100+/-15 1.0-100.0MHz Impendance delay screw(ns/100m) <45
Pair to Ground Capacitance Unbalance (PF/100m) 330Max Conductor DC resistance 20%(ohms/km) <93.8
Resistance Unbalance(%): 5 Spark Test 850 V AC
Dielectric Strength 2500 V DC / 3 seconds Insulation Resistance Test Min. 150 MΩ /Km
Conductor Resistance Max. 9.38Ω /100m at 20 Resistance Unbalance Max. 5%
Capacitance Unbalance Max. 330 pF/100m Mutual Capacitance Max. 5600 pF/100m

Network Link Test Reports (CAT5e 0.44mm Copper)

Package
305m or 152.5m pull box, other length in plastic reel or wooden reel available upon request.

Why choose us - advanced production line & management

We, SHG produce the quality, we focus on quality in our over 20 years growing.
Certificates
CE, RoHS, UL, ETL, ISO9001

Characteristics
1.0-100.0MHz Impendance(ohms) 100+/-15 1.0-100.0MHz Impendance delay screw(ns/100m) <45Pair to Ground Capacitance Unbalance (PF/100m) 330MaxConductor DC resistance 20%(ohms/km) <93.8 Resistance Unbalance(%): 5 Spark Test 850 V AC Dielectric Strength 2500 V DC / 3 secondsInsulation Resistance Test Min. 150 MΩ /Km Capacitance Unbalance Max. 330 pF/100mMutual Capacitance Max. 5600 pF/100mTest object: Jacket Test Material: PVC, PE, LSZHBefore Tensile strength(Mpa): >=13.8 Aging Elongation ((%): >=100Aging condition(C xhrs): 100x240 After Tensile strength(Mpa): >=85% of unagedAging Elongation(%): >=50% of naged

Standard Compliance
All Category 5e Requirements as Per ANSI/TIA/EIA, ISO/IEC, and CENELEC EN Standards:
Comply with below characteristics

Frequency MHz	Return loss dB	Attenuation dB/100m	NEXT dB	ACR dB	PSNEXT dB	ELEFXT dB/100m	PSELEXT dB/100m	Delay ns/100m
0.772	19.4	1.8	67	65	64	66	63	575
1.0	20.0	2.0	65.3	63.0	62.3	63.8	60.8	570
4.0	21.0	4.1	56.3	52.0	53.3	51.7	48.7	562
6.0	24.5	5.8	51.8	46.0	48.8	45.7	42.7	546.7
10.0	25.0	6.5	50.3	44.0	47.3	43.8	40.8	546.4
16.0	25.0	8.2	47.3	39.0	44.3	39.7	36.7	543
20.0	25.0	9.3	45.8	37.0	42.8	37.7	34.7	542
25.0	24.3	10.4	44.3	34.0	41.3	35.8	32.8	541.2
31.25	23.6	11.7	42.9	31.0	39.9	33.9	30.9	540.4
62.5	21.5	17	38.4	21.0	35.4	27.8	24.8	438.6
100.0	20.1	22	36.3	13.0	32.3	23.8	20.8	537.6